Model TH2830
Display 4.3 TFT LCD Display 480×272
Basic accuracy LCRZ 0.05%
DCR 0.10%
Test frequency 50Hz-100kHz, Continuous
AC Singal 10mVrms - 2Vrms; 100μArms - 20mArms
Output impedance 30Ω, 100Ω
RDC Signal level 1V
DC Bias -------
Test parameters L, C, R, |Z|, D, Q, |Y|, G, X, θd, θr, RDC, Vm, Im，△%
Test Speed (ms) Fast: 12.5ms; Middle: 83 ms; Slow: 167 ms
List Sweep 201 Dots. Parameter: Frequency, AC Voltage, AC Current, DC BIAS Voltage, DC BIAS Current
Test Result Display Measurement display 1: test status and results;
measurement display 2: sorting status and results
General Function Series, parallel equivalent mode, test cable length: 0, 1m, average: 1-255 times, calibration: open circuit, short circuit, load, ALC function(only TH2832)
Range selection: automatic, manual, trigger mode: INT, MAN, EXT, BUS, trigger delay: 0-999s, keyboard lock function
Special function L-RDC simultaneous test, soft power switch, one-key screenshot function, data recording function
Comparator function 10 bins, BIN1–BIN9, NG, AUX
Bin count function
PASS, FAIL LED display on front panel
Warranty:
As per Brand policy
