Set delivery location Support
Brands
1 / 2
Micsig Authorized brand

Micsig ACP1000 current clamp

SKU: AC1000
Rs. 25,100.00 MRP Rs. 29,000.00 Save Rs. 3,900.00 (14% off) Inclusive of GST-18%
Out of stock Dispatch lead time: Same Day Dispatch MOQ 1 piece
Currently out of stock

Enter your email and we will notify you when this product is available.

The Micsig ACP1000 probe was developed to make the measurement of alternating currents in industrial and electronic applications safe and uncomplicated. These current clamps make it possible to measure currents without interrupting the circuit, making measurements not only safer but also more convenient.

Key features of the ACP1000 series:

  • Wide measuring range and high precision: the ACP1000 series offers a wide measuring range from 0.1 A to 1000 A, with an accuracy of ±1 %. It is also capable of measuring peak currents of up to 2000 A (for up to 2 seconds) for short periods.
  • Simple signal evaluation: These clamps provide an output signal in mV/A that is proportional to the measured current. This enables direct and precise analysis without the need for additional conversions.
  • Versatile frequency range: With a frequency range from 10 Hz to 100 kHz, the ACP1000 series is suitable for a wide range of applications, including analysing alternating currents in motors, drives and industrial controls.
  • Compact and robust design: The ACP1000 current clamps are compact and robust, with a maximum clamping diameter of 52 mm, and have been developed for use in demanding environments. They function reliably in a temperature range from -15 °C to 75 °C.
  • High safety standards: The series complies with safety class CAT III 600V, making it ideal for use in high-voltage environments.
  • Flexible connection options: Equipped with a 1.5 m insulated BNC cable, the current clamps can be easily connected to oscilloscopes. With an optional BNC/Banana adapter, they can also be used with multimeters.
  • Versatile application possibilities: The ACP1000 series is optimal for monitoring power grids, analysing current waveforms in drives and motor controls, measuring currents in power transformers and avionics systems.
  • The Micsig ACP1000 series offers a robust, precise and user-friendly solution for AC current measurement in various industrial and technical applications. Its solid construction and ease of use make it an indispensable tool for engineers and technicians who need to perform accurate current measurements in complex systems.

 

Product information

Everything you need to know

Technical Specifications

Bandwidth      100 Hz - 100 KHz

Measuring range         100 mA - 1000 A

Nominal output          100 mV/A, 10 mV/A, 1 mV/A

Nominal load ≥100 kΩ

Accuracy level             3% ±10 mV/2% ±5 mV/1% ±1 mV

Highest accuracy       1%

Max primary current  2000A (2s)

Output signal mv/A

Operating temperature          -15°C bis +75°C

Protection class          CAT III 600 V

Max. Conductor size 52 mm

Dimensions (mm)      111 x 216 x 45

Output cable  1.5 m BNC-insulated coaxial output cable can be connected directly to an oscilloscope. Can also be used with multimeters, requires optional BNC/banana adapter.

Warranty
1 year

Application

Current, power energy power factor correction device, Industrial control device, Oscilloscope and harmonic waves analyzer