TWRobotics Advanced Kit for Arduino

All-in-one kit, a great starter kit for learning to code.

Great for Starting with Arduino Programming

Variety of components are included in this pack to try out different projects.

UNO Specs:

• Model Type: UNO Rev R3
• Microcontroller Chip: ATmega328
• Input Voltage (Recommended): 7-12V
• Input Voltage (limit): 6-20V
• Operating Voltage: 5
• Analog I/O Pins: 6
• Digital I/O Pins: 14 (of which 6 provide PWM output)
• PWM Digital I/O Pins: 6
• DC Current per I/O Pin: DC Current per I/O Pin: 40 mA; DC Current for 3.3V Pin: 50 mA
• Clock Speed: 16 MHz
• EEPROM: 1 KB (ATmega328)
• Flash Memory: 32 KB (ATmega328) of which 0.5 KB used by bootloader
• PWM Output Pins: 6
• SRAM: 2 KB (ATmega328)
• Power Supply Option: DC Jack or USB
• On Board LEDs: Yes
• Operating Temperature (°C): -40 to +90
• Dimensions in mm (LxWxH): 75 x 54 x 12
• Weight (gm): 26

 Package Includes :

Boards:

1 x Arduino UNO Development Board.

1 x MB102 830 point Solderless prototype Breadboard (White Color) with DST to stick.

1 x UNO Proto Shield Expansion Board with SYB-170 mini-Breadboard.

1 x (6 x AA) battery Holder with 5mm DC male Plug for 9V DC output.

Motors and Motor Driver:

1 x Tower Pro SG-90 9g Micro Servo Motor.

1 x 5V operated 28BYJ-48 Stepper Motor.

1x 5V Stepper Motor Driver Module.

1 x FF270PA Small DC Motor.

Displays:

1 x 1602A LCD Display (Blue).

1 x 4-Digit Seven Segment Display.

1 x 1-Digit Seven Segment Display.

1 x (8 x 8 Dots) Red LED Dot Matrix Display (L x W x H: 32 x 32 x 8 mm).

Sensors:

1 x Liquid Level Sensor Module.

1 x GY-521 MPU6050 3-Axis Gyroscope and Accelerometer IMU.

1 x HC-SR-04 Ultrasonic Sensor.

1 x Active Buzzer Element.

1 x Passive Buzzer Element.

1 x ASAIR DHT11 Humidity Sensor.

1 x LDR (Light Dependent Resistor) (Photoresistor).

Integrated Circuit (ICs):

1 x MAX 7219CNG (+1816) (Datasheet).

1 x SN74HC 595 (Datasheet).

Buttons and Keypads:

10 x Big Push Buttons (12 x 12 mm).

5 x Small Push button (6 x 6 mm).

1 x Dual Axis XY (PS2) JoyStick Module.

1 x (4×4) Membrane keypad.

LEDs (Light Emitting Diode):

1 x (4-lead) RGB Led.

10 x F5 LED- Red colour.

10 x F5 LED- Green Colour.

6 x F5 LED-While Colour.

10 x F5 LED- Yellow Colour.

Wires and Cables:

1 x 65Pcs. Bundle of Variable Size flexible Breadboard Jumper Wires (Male to Male pin).

1 x Female to male 20cm Multicolour 10 Dupont Lines Strip.

1x Universal USB to USB type D Cable (Colour: Blue, Length: 50cm ) for Arduino board.

Potentiometers and Resistors:

1 x 10K Potentiometer with Adjustable Knob.

1 x 5K Potentiometer with Adjustable Knob.

5 x 1K Resistance.

5 x 10K Resistance.

8 x 220R Resistance.

Other Modules and Accessories:

1 x Tri-color SMD Module.

1 x RFID Card Reader Module.

1 x RFID tag (Key-chain).

1 x RFID White Card (Debit/Credit Card Size ).

1 x IR Remote Control.

1 x IR Receiver LED.

1 x SRD 05V DC-SL-C Relay.